PROFILE MULVILLE PUSH STEM SHOW POLISHED

The Profile Mulville “Push” stem is named after Mark’s favorite trails.

• Locates bars 23mm (.9 inches) higher than the Acoustic Stem.
• Steerer Tube Size: 1-1/8″(28.58mm)
• Handelbar Size: 7/8″(22.22mm)
• Sizes: 48mm, 53mm, 58mm, 63mm

Reach: 48mm

• Stack Height: 33mm
• Rise: 31.7mm (Upright) / 1.3mm (Invert)
• Clamp bolts: 5/16″x18tpi (x4)
• Pinch Bolts: 5/16″x18tpi (x2)
• Weight: with chromo bolts: 283g/9.95oz with titanium bolts: 253g/8.95oz

Reach: 53mm

• Stack Height: 33mm
• Rise: 31.7mm (Upright) / 1.3mm (Invert)
• Clamp bolts: 5/16″x18tpi (x4)
• Pinch Bolts: 5/16″x18tpi (x2)
• Weight: with chromo bolts: 297g/10.45oz with titanium bolts: 267g/9.45oz

Reach: 58mm

• Stack Height: 33mm
• Rise: 31.7mm (Upright) / 1.3mm (Invert)
• Clamp bolts: 5/16″x18tpi (x4)
• Pinch Bolts: 5/16″x18tpi (x2)

Because 58mm Push stems are older stock, most of them have not been updated with a recessed steer tube hole.
Weight: with chromo bolts: 310g/10.85oz with titanium bolts: 280/9.85oz

Reach: 63mm

• Stack Height: 33mm
• Rise: 31.7mm (Upright) / 1.3mm (Invert)
• Clamp bolts: 5/16″x18tpi (x4)
• Pinch Bolts: 5/16″x18tpi (x2)

Because 63mm Push stems are older stock, most of them have not been updated with a recessed steer tube hole.
Weight: with chromo bolts: 324g/11.4oz with titanium bolts: 294g/10.4oz

Uses 1/4″ Allen wrench.