No products
Prices are tax included
Product successfully added to your shopping cart
Stems
Cranksets / Arms
Spiders
Crank Hardware
Bottom Bracket
Sprokets
Chainrings
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chain Tensioners
Seats
Hats
Stems
Sprokets
Hubsets
Hubsets
Front Hubs
Rear Hubs
Cogs
Sporkets
Chainrings
Cogs
Tires
Tubes
Forks
Stems
Cranksets / Arms
Bottom Bracket
Crank Hardware
Sprokets
Chainrings
Spiders
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chains
Chain Tensioners
Seats
Rims
Custom Wheelsets
Braking
Hats
FILTERS
Shipping
24/48h Shipping for France. 2 to 4 days for Europe
Shipping offered
from 99 € order (France only)
Paiement
Secure payment SSL credit cards Visa, Mastercard by Stripe.
BMX Parts
326 products.
-
CNC machined from 7075 aluminum The Profile Sabre is a unique “universal” sprocket. It uses an adapter insert to make the sprocket compatible with spline drive or bolt on style cranks. The adapter is available for 19mm & 22mm axle sizes. A Universal Adapter Insert can be added when purchasing the guard sprocket(Recommended), purchased seperately, or...
82,00 € TTC -
CNC machined from aircraft quality billet aluminum plate. Thickness : 5mm. Fanned Design. NOTE: Sizes below 42T do not have scalloped design because of size restrictions. 104mm Hole Pattern. Sizes: 36T-45T.
55,00 € TTC -
CNC machined from aircraft quality billet aluminum plate. Thickness: 5mm. Fanned Design. NOTE: Sizes below 42T do not have scalloped design because of size restrictions. 110mm Hole Pattern. Sizes: 34T-40T
55,00 € TTC -
The "Stem" reference by Profile Made in USA! A unique quality in Mini Size. CNC machined inside and outside. Hollow body has inside to weight gain. Cover engraved Profile. Stack Height: 15mm Steerer Tube Size: 1" Handelbar Size: 7/8″(22.22mm) Weight: 35mm: 167g
99,00 € TTC -
If your hub has a slight side to side wobble, then Profile Hub Shims may fix it. They are designed to be installed behind the bearing, requiring you to disassemble and then reassemble your hubs. Hub Shims are only .005″ each. If there is a significant wobble to your hub, a shim is probably not going to make a difference- the wobble is being caused by a...
8,00 € TTC -
The driver shim (or thrust washer) fits between the driver and the hub body bearing and prevents the driver from grinding into the hub body. The same driver spacer is used for every Profile and Madera hub, (Profile Mini, Totem, Elite, High Flange, MTB, and Elite MTB, and Madera V2 Cassette.) -STEEL (.81″ OD X .596″ ID X .025″ THICK).
2,00 € TTC -
Set of 6 replacement Chromoly bolts for Profile Mini Acoustic Stem. BMX Mini Acoustic: M6 x 1 thd x 20mm length Compatibility : Mini Acoustic.
30,00 € TTC -
Use to install and remove Spline drive sprockets, Spline Drive Spiders, and crank arms from the 48 spline axle of the Profile and Madera 3-Piece Crankset. 19mm Solid axle tool: 3/8 x 24 SAE thread
26,00 € TTC -
Use to install and remove Spline drive sprockets, Spline Drive Spiders, and crank arms from the 48 spline axle of the Profile and Madera 3-Piece Crankset. 22mm Column axle tool: M17 x 1.25 threads
26,00 € TTC -
BMX stems for old school bike technology. CrMo quill and expander wedge. Quill diameter is 20.58mm – fits 1-inch steerer tube. Sizes: Pro(46mm) Colors: “Show”Polished Weight Pro: 596g/20.86
133,00 € TTC -
Reissue of the famous Whippit Profile board from the 90s. Precision CNC machined from aircraft grade aluminum plate 3/32" wide teeth. 7/8" (22.2mm) hole with 19mm adapter included - does not fit cranks with 24mm axles, Odyssey Thunderbolt cranks or 1 piece cranks. Superb Show polished finish!
108,00 € TTC -
These sprocket Insert are proprietary to the Profile Sabre sprocket and Madera Signet Guard. Made from 4140 chromoly. Available to adapt your Sabre or Madera Signet Guard sprockets to either: 22mm Spline Drive
13,00 € TTC -
Use to install and remove Spline drive sprockets, Spline Drive Spiders, and crank arms from the 48 spline axle of the Profile and Madera 3-Piece Crankset. 19mm GDH axle tool: M12 x 1.25 thread
26,00 € TTC -
Titanium 3/8 x 24 thread Standard Sprocket Bolt Button Head bolt style Weight: 8g
19,00 € TTC -
Small details make a big difference… This is surely the case with Profile’s BMX hub cone spacers. The spacers feature clean styling and brilliant colored anodizing. For use on non drive side of 14mm cassette hub axles & both sides of 14mm front hub axles. They will fit Profile (Elite, Totem, Mini, Z Coaster®) and Madera 14mm BMX hub axles. Sold by unit
10,00 € TTC -
Elite Cassette Driver Seal. Used on Elite BMX & Elite MTB style(6 pawl) Cassette Drivers. It is made of black Nylon and marked “Profile Racing Made in USA”.
3,50 € TTC -
Mini Cassette Driver Seal. Used on Mini BMX, Totem BMX, High Flange BMX, & Classic MTB style(4 pawl) Cassette Drivers. It is a standard rubber o-ring.
1,50 € TTC -
RETRO-American cups and bearings for your Profile Racing 3-Piece Race Style Crank set – comes with flat cups, sealed bearings, tube spacer and aluminum spacer washers. These are the original styled American BB cups, perfect for your vintage restoration. Silver. For 19mm Axle & American BB. SS-American cups and bearings for your Profile Racing 3-Piece...
43,00 € TTC -
The Madera Helm Spline-Drive Sprocket is a classic helm sprocket built to be super tough with high-quality materials and engineering. Constructed from durable 7075 aluminum with a hardened chromoly steel insert, this sprocket is built to last without adding much weight. The insert matches up with the 48-spline spindle which is included. No sprocket bolt...
85,00 € TTC -
The Madera Helm Spline-Drive Sprocket is a classic helm sprocket built to be super tough with high-quality materials and engineering. Constructed from durable 7075 aluminum with a hardened chromoly steel insert, this sprocket is built to last without adding much weight. The insert matches up with the 48-spline spindle which is included. No sprocket bolt...
85,00 € TTC -
For use on frames with American BB shells. Formerly known as the American Bottom Bracket with Hop Up Kit. Gives your Profile crankset that “finished” look. Includes cups, sealed bearings, tube spacer, cone washers, and flat washers. SS 7/8 bottom brackets will only fit the late 90’s, Profile SS cranks. Weight: 19mm axle BB-265g/9.27 oz
54,00 € TTC -
The Profile Racing Chrome Moly Race Crankset(RHD) is everything you need to run Profile cranks except the bottom bracket (which is sold seperately). The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB. Right hand crank arm has sprocket boss. RHD crankset includes crank arms, 19mm GDH heat-treated...
276,00 € TTC -
Profile Racing designed Elite Hubset to be the best racing hubset available! They are also suitable for trails and light park use. Button Head w/8mm internal hex CrMo 3/8 axle Standard BMX 100mm(front) hub widths Weight: 231g
149,00 € TTC -
*Only for use with Profile Racing AC-2 BMX Disc Brake Cassette Hub* Adapts disk brake caliper to frames without built in mounts. Simple installation. Replaces disc side hub cone. No bolts or tools required. Sizes: 10mm axle/140mm disc, 15mm axle/140mm disc Color: Black anodize Weight: 70 g/2.44 oz
105,00 € TTC -
The High Flange Front Hub is the forerunner of Profile Racing’s current Mini Front Hub. Both hubs use the same axle bolts, but not the same axle. They are suitable for trails, racing, street, and park use. Front: High Flange hubshell. Aluminum hollow 3/8″axle for dramatic weight savings. Standard 3/8 socket head bolts(8mm hex)- come with polished Volcano...
588,00 € TTC -
Replacement heat treated Chromoly Jam Nuts for Profile 14mm cassette hub axles and 14mm front hub axles. Can be used on Mini, Totem, Elite, Z Coaster®, Track or Madera hubs with a 14mm axle. Sold as a set (two nuts)
12,00 € TTC -
Replacement heat treated Chromoly Jam Nuts for Profile 14mm cassette hub axles and 14mm front hub axles. Can be used on Mini, Totem, Elite, Z Coaster®, Track or Madera hubs with a 14mm axle. Sold as a set (two nuts)
39,00 € TTC -
Profile Hub Axle Nuts & Washers are CNC machined for style and strength.-Each axle nut comes with a steel washer.-Nuts & washsers sold as sets(2-nuts, 2-washers)-3/8-24 thd New School -7075 Aluminum-Use 15mm SocketWeight: 6g/.21 oz
19,00 € TTC -
The Profile Racing Chrome Moly Race Crankset(RHD) is everything you need to run Profile cranks except the bottom bracket (which is sold seperately).The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB.Right hand crank arm has sprocket boss.RHD crankset includes crank arms, 19mm GDH heat-treated CrMo...
357,00 € TTC -
Profile Hub Axle Nuts & Washers are CNC machined for style and strength. Each axle nut comes with a steel washer. Nuts & washsers sold as sets(2-nuts, 2-washers) 14mm-7075 Aluminum-Use 17mm Socket Weight: 7g/.25 oz
17,00 € TTC -
The Profile Signet Universal Guard Sprocket is machined from 6061 aluminum, made in the USA by Profile Racing. The Signet Guard is a unique “universal” sprocket. It uses an adapter insert to make the sprocket compatible with spline drive or bolt on style cranks. The adapter is available for 19mm, 22mm, & 24mm axle sizes. One sprocket fits all! A...
95,00 € TTC -
These sprocket Insert are proprietary to the Profile Sabre sprocket and Profile, Madera Signet Guard. Made from 4140 chromoly. Available to adapt your Sabre or Madera Signet Guard sprockets to either: 24mm Bolt On.
13,00 € TTC -
There’s no better chain for the price than the hard-working 410 series. Need extreme rust resistance? Want a beautiful, long-wearing chain to match your frame, wheels, or grips? With seven different color combinations, there’s a 410 that’s perfect for your ride. Wide chain Compatibility: BMX FREESTYLE Dimensions: 1/2” x 1/8” MADE IN JAPAN Links: 116...
13,70 € TTC -
There’s no better chain for the price than the hard-working 410 series. Need extreme rust resistance? Want a beautiful, long-wearing chain to match your frame, wheels, or grips? With seven different color combinations, there’s a 410 that’s perfect for your ride. Wide chain Compatibility: BMX FREESTYLE Dimensions: 1/2” x 1/8” MADE IN JAPAN Links: 116...
23,80 € TTC -
There’s no better chain for the price than the hard-working 410 series. Need extreme rust resistance? Want a beautiful, long-wearing chain to match your frame, wheels, or grips? With seven different color combinations, there’s a 410 that’s perfect for your ride. Wide chain Compatibility: BMX FREESTYLE Dimensions: 1/2” x 1/8” MADE IN JAPAN Links: 116...
23,80 € TTC -
All the style and durability of the 410 in a chain made for BMX Race (Narrow chain). Narrow chain Compatibility: BMX RACE Dimensions: 1/2” x 3/32” MADE IN JAPAN Links: 116 Weight: 362g
16,90 € TTC
