No products
Prices are tax included
Product successfully added to your shopping cart
Stems
Cranksets / Arms
Spiders
Crank Hardware
Bottom Bracket
Sprokets
Chainrings
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chain Tensioners
Seats
Hats
Stems
Sprokets
Hubsets
Hubsets
Front Hubs
Rear Hubs
Cogs
Sporkets
Chainrings
Cogs
Tires
Tubes
Forks
Stems
Cranksets / Arms
Bottom Bracket
Crank Hardware
Sprokets
Chainrings
Spiders
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chains
Chain Tensioners
Seats
Rims
Custom Wheelsets
Braking
Hats
FILTERS
Shipping
24/48h Shipping for France. 2 to 4 days for Europe
Shipping offered
from 99 € order (France only)
Paiement
Secure payment SSL credit cards Visa, Mastercard by Stripe.
-
The Profile Racing Imperial sprocket is CNC machined from 6061 aluminum in the USA! The Imperial is a “bolt-on” style and requires only one screw to attach to the crank arm. Only available for 19mm axles. Tooth width 3/32". Supplied with 19mm silver steel insert. The widest variety of sizes and colors of ANY sprocket ever! Weight: 67g/2.34oz (26t)....
60,00 € TTC -
The bags are made from 600D polyester fabric with a water resistant lining and are branded with the Profile Racing logo inside and out. 2- carry handles along with a padded shoulder strap 2- end pockets with mesh inner pockets The large storage flap has a mesh zipper pocket for smaller items and a large center storage compartment capable of holding all...
125,00 € TTC -
Profile No Boss cranks are exactly the same as Profile Race Cranks, with the sole exception that they lack a boss to bolt a sprocket onto them. They require you to run a Spline Drive Sprocket or Spider. They can be used for left or right hand drive. Crankset includes crank arms, 19mm GDH heat-treated CrMo axle, GDH crank bolts, flush washers, and crank...
231,00 € TTC -
Profile No Boss cranks are exactly the same as Profile Race Cranks, with the sole exception that they lack a boss to bolt a sprocket onto them. They require you to run a Spline Drive Sprocket or Spider. They can be used for left or right hand drive. Crankset includes crank arms, 19mm GDH heat-treated TITANIUM axle, GDH TITANIUM crank bolts, flush washers,...
357,00 € TTC -
Profile Racing "FAT" Kevlar-based saddle. Fabric covering. Embroidered Wing Profile logo. Pivotal system. Weight: 300g.
59,00 € TTC -
Profile Racing slim Kevlar-based saddle. Fabric covering. Embroidered Wing Profile logo. Pivotal system. Weight: 258g.
59,00 € TTC -
Profile Racing slim Kevlar-based saddle. Fabric covering. Embroidered Wing Profile logo. Pivotal system. Weight: 258g.
59,00 € TTC -
Profile Racing slim Kevlar-based saddle. Fabric covering. Embroidered Wing Profile logo. Pivotal system. Weight: 258g.
59,00 € TTC -
Profile Racing slim Kevlar-based saddle. Fabric covering. Embroidered Wing Profile logo. Pivotal system. Weight: 258g.
59,00 € TTC -
Profile Racing slim Kevlar-based saddle. Fabric covering. Embroidered Wing Profile logo. Pivotal system. Weight: 258g.
59,00 € TTC -
Profile Racing slim Kevlar-based saddle. Fabric covering. Embroidered Wing Profile logo. Pivotal system. Weight: 258g.
59,00 € TTC -
Profile Racing slim Kevlar-based saddle. Fabric covering. Embroidered Wing Profile logo. Pivotal system. Weight: 258g.
59,00 € TTC -
The Profile Racing Chrome Moly Race Crankset(RHD) is everything you need to run Profile cranks except the bottom bracket (which is sold seperately).The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB.Right hand crank arm has sprocket boss.RHD crankset includes crank arms, 19mm GDH heat-treated CrMo...
357,00 € TTC -
The Profile Racing Chrome Moly Race Crankset(RHD) is everything you need to run Profile cranks except the bottom bracket (which is sold seperately). The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB. Right hand crank arm has sprocket boss. RHD crankset includes crank arms, 19mm GDH heat-treated...
231,00 € TTC -
The Profile Racing Chrome Moly Race Crankset(RHD) is everything you need to run Profile cranks except the bottom bracket (which is sold seperately). The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB. Right hand crank arm has sprocket boss. RHD crankset includes crank arms, 19mm GDH heat-treated...
276,00 € TTC -
CNC machined from 7075 Aluminum in the USA! Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. Available for 19mm splined axles only. 1/8″ tooth width for use with most freestyle/street & single speed chains. Supplied with 19mm splined steel...
89,00 € TTC -
CNC machined from 7075 Aluminum in the USA! Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. Available for 19mm splined axles only. 1/8″ tooth width for use with most freestyle/street & single speed chains. Supplied with 19mm splined steel...
89,00 € TTC -
CNC machined from 7075 Aluminum in the USA! Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. Available for 19mm splined axles only. 1/8″ tooth width for use with most freestyle/street & single speed chains. Supplied with 19mm splined steel...
89,00 € TTC -
CNC machined from 7075 Aluminum in the USA! Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. Available for 19mm splined axles only. 1/8″ tooth width for use with most freestyle/street & single speed chains. Supplied with 19mm splined steel...
89,00 € TTC -
CNC machined from 7075 Aluminum in the USA! Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. Available for 19mm splined axles only. 1/8″ tooth width for use with most freestyle/street & single speed chains. Supplied with 19mm splined steel...
89,00 € TTC -
CNC machined from 7075 Aluminum in the USA! Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. Available for 19mm splined axles only. 1/8″ tooth width for use with most freestyle/street & single speed chains. Supplied with 19mm splined steel...
89,00 € TTC -
CNC machined from 7075 Aluminum in the USA! Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. Available for 19mm splined axles only. 1/8″ tooth width for use with most freestyle/street & single speed chains. Supplied with 19mm splined steel...
89,00 € TTC -
2008 marked the 40th anniversary of Profile Racing. To help celebrate this occasion, Profile Racing re-released the re-manufactured original box style cranksets. The cranksets are made on our original 1979 tooling. They are replicas of the originals including decals, grade 8 gold zinc bolts and washers, aluminum spider, American BB with 5-3/4" solid axle...
583,00 € TTC -
Reissue of the famous Whippit Profile board from the 90s. Precision CNC machined from aircraft grade aluminum plate 3/32" wide teeth. 7/8" (22.2mm) hole with 19mm adapter included - does not fit cranks with 24mm axles, Odyssey Thunderbolt cranks or 1 piece cranks. Superb Show polished finish!
108,00 € TTC -
Small details make a big difference! This is surely the case with 3/8″ axle rear hub cone spacers. The aluminum spacers feature clean styling and an added hardened steel serrated washer. These cone spacer sets will work on Profile Elite BMX, Profile Mini, & Madera hubs with 3/8″ axles Sold as sets(two spacers)
35,00 € TTC -
Profile’s Vintage BMX Spider. 6061 aluminum. 5 Bolt 110mm BCD Fits 19mm(.75″) and .875″ axles *Will not work on 22mm axles* Weight: 70g/2.45 oz
50,00 € TTC -
CNC machined from 7075 aluminum The Profile Sabre is a unique “universal” sprocket. It uses an adapter insert to make the sprocket compatible with spline drive or bolt on style cranks. The adapter is available for 19mm & 22mm axle sizes. A Universal Adapter Insert can be added when purchasing the guard sprocket(Recommended), purchased seperately, or...
82,00 € TTC -
The Profile Signet Universal Guard Sprocket is machined from 6061 aluminum, made in the USA by Profile Racing. The Signet Guard is a unique “universal” sprocket. It uses an adapter insert to make the sprocket compatible with spline drive or bolt on style cranks. The adapter is available for 19mm, 22mm, & 24mm axle sizes. One sprocket fits all! A...
95,00 € TTC -
The Profile Signet Universal Guard Sprocket is machined from 6061 aluminum, made in the USA by Profile Racing. The Signet Guard is a unique “universal” sprocket. It uses an adapter insert to make the sprocket compatible with spline drive or bolt on style cranks. The adapter is available for 19mm, 22mm, & 24mm axle sizes. One sprocket fits all! A...
95,00 € TTC -
Spanish bottom brackets are for 37mm diameter bottom bracket frame. For use with 19mm axle. Weight: 165g/5.78 oz Bottom Bracket includes: Bearings (2) Tube spacer 68mm (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8′ Thick spacer (1) 1/16′ Thin spacer (1)
39,00 € TTC -
Spanish bottom brackets are for 41mm diameter bottom bracket frame. For use with 22mm axle. Weight: 163g/5.70 oz Bottom Bracket includes: Bearings (2) Tube spacer 73mm (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8′ Thick spacer (1) 1/16′ Thin spacer (1)
49,00 € TTC -
The Profile Spider is CNC machined from aircraft quality billet aluminum. 19mm spindle hole fits most cranks without the need for an adapter. 4 bolts BCD 104mm.
50,00 € TTC -
The Profile Spider is CNC machined from aircraft quality billet aluminum. 19mm spindle hole fits most cranks without the need for an adapter. 4 points BCD 104mm.
50,00 € TTC -
The Profile Spline Drive Spider is CNC machined in the USA from aircraft grade aluminum and features a slight offset to help correct chain alignment when used with the Profile External Euro BB.For 4 points chainrings BCD 104mm.19mm 48 splines version for Profile Race and Noboss crankset.22mm 48 splines version for Profile Elite and Column crankset.
99,00 € TTC -
The Profile Spline Drive Spider is CNC machined in the USA from aircraft grade aluminum and features a slight offset to help correct chain alignment when used with the Profile External Euro BB.For 4 points chainrings BCD 104mm.19mm 48 splines version for Profile Race and Noboss crankset.22mm 48 splines version for Profile Elite and Column crankset.
99,00 € TTC -
The Profile Spline Drive Spider is CNC machined in the USA from aircraft grade aluminum and features a slight offset to help correct chain alignment when used with the Profile External Euro BB.For 4 points chainrings BCD 104mm.19mm 48 splines version for Profile Race and Noboss crankset.22mm 48 splines version for Profile Elite and Column crankset.
99,00 € TTC
