No products
Prices are tax included
Product successfully added to your shopping cart
Stems
Cranksets / Arms
Spiders
Crank Hardware
Bottom Bracket
Sprokets
Chainrings
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chain Tensioners
Seats
Hats
Stems
Sprokets
Hubsets
Hubsets
Front Hubs
Rear Hubs
Cogs
Sporkets
Chainrings
Cogs
Tires
Tubes
Forks
Stems
Cranksets / Arms
Bottom Bracket
Crank Hardware
Sprokets
Chainrings
Spiders
Hubsets
Front Hubs
Rear Hubs
Hubs parts access.
Cogs / Freewheels
Drivers
Hub Guards
Chains
Chain Tensioners
Seats
Rims
Custom Wheelsets
Braking
Hats
FILTERS
Shipping
24/48h Shipping for France. 2 to 4 days for Europe
Shipping offered
from 99 € order (France only)
Paiement
Secure payment SSL credit cards Visa, Mastercard by Stripe.
-
Small details make a big difference! This is surely the case with 3/8″ axle rear hub cone spacers. The aluminum spacers feature clean styling and an added hardened steel serrated washer. These cone spacer sets will work on Profile Elite BMX, Profile Mini, & Madera hubs with 3/8″ axles Sold as sets(two spacers)
35,00 € TTC -
The Profile Gun Drilled Hollow (GDH) 22mm Crank axles are a great way to take a large chunk of weight off of your bike without sacrificing a great deal of durability. FOR COLUMN/BANTAM & ELITE CRANKS-22MM Uses GDH Crank Tool. Older crank tools will not work. Includes 8mm GDH CrMo crank bolts and aluminum flush washers. The GDH CrMo axle has the same...
141,00 € TTC -
The Profile Gun Drilled Hollow (GDH) 19mm Crank axles are a great way to take a large chunk of weight off of your bike without sacrificing a great deal of durability. Uses GDH Crank Tool. Older crank tools will not work. Includes 6mm GDH CrMo crank bolts and aluminum flush washers. The GDH CrMo axle has the same Limited Lifetime Warranty as our Race...
112,00 € TTC -
Like all of our Titanium products, the GDH Ti Crank axle is designed for weight savings which can mean a reduction in strength. It’s perfect for racing, park, flatland, and light street, but if you like to jump down 8 sets and off of rooftops, then you will be better served with our CrMo axle. The Ti GDH crank axle does not carry a warranty Uses GDH Crank...
206,00 € TTC -
Steel heat treated crank bolts for Profile solid 19mm crank axles. 3/8 x 24thd with a standard bolt head. Includes (2) bolts and (2) steel flat washers. Weight(per set of two): 48g/1.68 oz
7,00 € TTC -
Copper heat treated crank bolts for Profile solid 19mm crank axles. 3/8 x 24thd with a standard bolt head. Includes (2) bolts and (2) steel flat washers. Weight(per set of two): 48g/1.68 oz
7,00 € TTC -
The High Flange Front Hub is the forerunner of Profile Racing’s current Mini Front Hub. Both hubs use the same axle bolts, but not the same axle. They are suitable for trails, racing, street, and park use. Front: High Flange hubshell. Aluminum hollow 3/8″axle for dramatic weight savings. Standard 3/8 socket head bolts(8mm hex)- come with polished Volcano...
588,00 € TTC -
The High Flange Front Hub is the forerunner of Profile Racing’s current Mini Front Hub. Both hubs use the same axle bolts, but not the same axle. They are suitable for trails, racing, street, and park use.FREEWHEEL VERSION Front: High Flange hubshell. Aluminum hollow 3/8″axle for dramatic weight savings. 3/8″ Aluminum center axle with chromoly studs and...
494,00 € TTC -
The High Flange Front Hub is the forerunner of Profile Racing’s current Mini Front Hub. Both hubs use the same axle bolts, but not the same axle. They are suitable for trails, racing, street, and park use.FREEWHEEL VERSION Front: High Flange hubshell. Aluminum hollow 3/8″axle for dramatic weight savings. 3/8″ Aluminum center axle with chromoly studs and...
494,00 € TTC -
Profile Racing’s Aluminum Hub Axles are precision CNC machined from 7075 Aluminum for unmatched strength and lightness. Elite Cassette 3/8″ Threaded Axle(fits Profile Elite cassette hubs). Width: 110mm. Weight: 40g/1.4 oz
40,00 € TTC -
Profile Racing’s Aluminum Hub Axles are precision CNC machined from 7075 Aluminum for unmatched strength and lightness. Mini Front 3/8″ Threaded Axle (fits Profile Mini, Totem, Elite, & Madera front hubs) Width: 100mm. Weight: 36g/1.26 oz
35,00 € TTC -
Profile Racing’s Aluminum Hub Axles are precision CNC machined from 7075 Aluminum for unmatched strength and lightness. Mini Cassette 3/8″ Threaded Axle (fits Profile Mini, Totem, High Flange, & Madera cassette hubs) Width: 110mm. Weight: 40g/1.4 oz
40,00 € TTC -
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm GDH Mini Rear Axle(fits Profile Mini & Madera front hubs)14mm axles include cone spacers and two jam nuts Weight: 197g/6.95 oz
90,00 € TTC -
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm Solid Mini Cassette Axle(fits Profile Mini, Totem, High Flange, & Madera cassette hubs)14mm axles include cone spacers and two jam nuts Weight: 232g/8.12 oz
62,00 € TTC -
Profile Racing’s TITANIUM Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm GDH Mini Rear Axle(fits Profile Mini & Madera front hubs)14mm axles include cone spacers and two jam nuts Weight: 125g/4.40z
198,00 € TTC -
Z Coaster® BEARINGS Replacement Hub bearings for the Z Coaster® hub driver. There are Two (2) MFG #6802. (15MM ID x 24MM OD x 5MM W) bearings in a Profile Racing Z Coaster® hub driver.
14,00 € TTC -
Replacement bearings for all Profile BMX, MTB, TRACK and Madera hub shells. They are sealed and self-lubricating. 6902 bearing (sold individualy) (15MM ID x 28MM OD x 7MM W)For Profile Fixed/Track Rear Hubs & Road Cassette Hubs. Each hub shell uses two bearings. Bearing seal color subject to change without notice.
8,00 € TTC -
Replacement bearings for all Profile BMX, MTB, TRACK and Madera hub shells. They are sealed and self-lubricating. Set X2 6903 bering (17MM ID x 30MM OD x 7MM W) For Profile Mini, Totem, Elite Bmx, Elite MTB, & Classic MTB hubs, as well as Fixed/Track Front Hubs, Madera Front Pilot and Madera Rear V-2 hubs. Each hub shell uses two bearings. Bearing...
16,00 € TTC -
Chromoly 3/8-16 thd (10mm) button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 8mm hex key. Note: 3/8 bolts NOT intended for peg use.. Weight: 33g
18,00 € TTC -
Titanium 3/8-16 thd button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. CNC machined from highest quality 6Al-4V Titanium Bolts sold individually Aluminum washer included Use 8mm hex key Note: 3/8 titanium bolts NOT intended for peg use. Weight: 19g
29,50 € TTC -
Chromoly 3/8-16 thd (10mm) to 14mm button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 8mm hex key. Note: 3/8 bolts NOT intended for peg use.. Weight: 36g
18,00 € TTC -
Chromoly 3/8-16 thd (10mm) to 14mm for PEG button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle.The peg version. This bolt has a longer 14mm step section that’s long enough for both a 14mm peg as well as a 14mm dropout. Bolts sold individually. Aluminum washer included. Use 8mm hex key. Weight: 43g
18,00 € TTC -
Titanium 3/8-16 thd to 14mm step(for use in 14mm dropouts) button head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. CNC machined from highest quality 6Al-4V Titanium Bolts sold individually Aluminum washer included Use 8mm hex key Note: 3/8 titanium bolts NOT intended for peg use. Weight: 20g
29,50 € TTC -
Chromoly 3/8-16 thd socket head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually Washers and cones not included Use 8mm or 5/16′ hex keys Weight: 25g
8,50 € TTC -
Titanium 3/8-16 thd socket head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually CNC machined from highest quality 6Al-4V Titanium Washers and cones not included Use 8mm or 5/16′ hex keys Weight: 14g
29,50 € TTC -
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 3/8″ Threaded Elite Cassette Axle(fits Profile Elite cassette hubs only) Width: 110mm. Weight: 109g
55,00 € TTC -
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. Mini Front 3/8″ Threaded Axle (fits Profile Mini, Totem, Elite, & Madera front hubs) Width: 100mm. Weight: 98g
50,00 € TTC -
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. Mini Cassette 3/8″ Threaded Axle (fits Profile Mini, Totem, High Flange, & Madera cassette hubs) Width: 110mm. Weight: 109g
55,00 € TTC -
Chromoly 3/8-16 thd (10mm) HEX 17mm head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 17mm key. Note: 3/8 bolts NOT intended for peg use. Weight: 37g
18,00 € TTC -
Chromoly 3/8-16 thd (10mm) to 14mm HEX 17mm head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle. Bolts sold individually. Aluminum washer included. Use 17mm key. Note: 3/8 bolts NOT intended for peg use. Weight: 41g
18,00 € TTC -
Chromoly 3/8-16 thd (10mm) to 14mm HEX 17mm head bolts for use in any Profile BMX/MTB or Madera 3/8″ threaded hub axle.Peg version. This bolt has a longer 14mm step section that’s long enough for both a 14mm peg as well as a 14mm dropout. Bolts sold individually. Aluminum washer included. Use 17mm key. Weight: 45g
18,00 € TTC -
If your hub has a slight side to side wobble, then Profile Hub Shims may fix it. They are designed to be installed behind the bearing, requiring you to disassemble and then reassemble your hubs. Hub Shims are only .005″ each. If there is a significant wobble to your hub, a shim is probably not going to make a difference- the wobble is being caused by a...
8,00 € TTC -
This Lock Ring & Spacer will fit on ANY Profile Racing one speed(single cog) splined driver. 7075 Aluminum Silver only Price includes both pieces Uses a 36mm wrench
13,00 € TTC -
Mid bottom brackets are for 41mm diameter bottom bracket frame. For use with 19mm axle. Weight: 165g/5.78 oz Bottom Bracket includes: Bearings (2) Tube spacer 73mm (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8′ Thick spacer (1) 1/16′ Thin spacer (1)
39,00 € TTC -
Mid bottom brackets are for 41mm diameter bottom bracket frame. For use with 22mm axle. Weight: 163g/5.70 oz Bottom Bracket includes: Bearings (2) Tube spacer 73mm (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8′ Thick spacer (1) 1/16′ Thin spacer (1)
49,00 € TTC -
The "Stem" reference by Profile Made in USA! A unique quality in Mini Size. CNC machined inside and outside. Hollow body has inside to weight gain. Cover engraved Profile. Stack Height: 15mm Steerer Tube Size: 1" Handelbar Size: 7/8″(22.22mm) Weight: 35mm: 167g
99,00 € TTC
